FM200 Fire Suppression System. 2 wwwnaffcocom FM-200 ® CLEAN AGENT FIRE SUPPRESSION SYSTEM electric and manual actuation of the container or an Impulse Valve Pneumatic Operator (IVPO) for pneumatic operation. • Pressure Gauge Port is used to connect a Pressure page 1 ® fm200 model ft fire extinguishers installation instructions owner's manual this manual is an integral part of the system and as such, the extinguisher must be installed and maintained accordingly. read and comply with these instructions, warnings and limitations before installing. www.minimaxfp.com 4. The FM-200 control panel shall be a Kidde, Aegis Control Panel, and shall perform the functions necessary to operate the detection, control and release of the FM-200 Suppression System. The panel shall accept input from the following types of equipment used to make up the system: smoke detectors, thermal detectors, and manual pull stations. MATERIAL SAFETY DATA SHEET FM-200 (Fire Extinguishing Agent) Revision Date: February 9, 2009 Page 2 of 6 4. FIRST AID MEASURES Eyes Immediately flood the eye with plenty of warm water for at least 15 minutes, holding the eye open. FM-200® is a clean, colorless, and environmentally friendly fire suppression agent that is electrically non-conductive and safe for humans. It extinguishes flames primarily through heat absorption, leaving no residue, thus minimizing downtime after a fire and making FM-200 suppression systems accepted and respected worldwide with over one hundred thousand installations in more than seventy has been provided for those individuals that are responsible for the design, installation, and/or maintenance of inimax ssP 1230 Clean m gent Fire a suppression ystems. s it is the responsibility of the designer and installer to remain within the parameters established in this design, installation and maintenance manual. FM 200 is a halocarbon agent accepted as an alternative to halon for total flooding fire suppression systems. After rece